Worlds Strongest Dome Tents - Since 1976 - Portable Affordable Reliable
yurtdomes accessories shelters grip clips testimonials q&a manual map home sizes store
relieftents playadomes prepareshelters designs grodomes bubbledomes crystalcaves
Wooden Bike Plans
The Wooden Bike Plans include patterns and simple instructions for making your own wooden bike and include a licence to make one.
Warning: This wooden bike is a proto- type and has not been tested to be safe and it is there for to be built and used at the risk of the user and or builder. The above bike worked well for riders under 140 lbs at slow speeds on a smooth road. Heavier riders, speed or bumpy road conditions are not recommended. Wooden members should be thicken to handle heavier loads. Some images of this proto type show screws but bolts should be used through out.
See Wooden Bikes for more wooden bikes.
Needed: two 20" wheels (plans may be adjusted for other size wheels); wood: clear straight grain ash or hickory is preferred but Douglas fir has been used; white glue; heavy duty hinge; bolts; screws; 1/4" nylon cord; wood dowel for handle. Drill bits for dowel and bolts and cord. The length of the wooden members are: front fork is 39"; the seat spars are 39"; the lower spars are 34". All wooden members are 1 1/2" wide and 3/4" thick.
Read and study plans before you start.
Use a heavy gage hinge for front pivots. Use bolts or screws to secure hinge. hinge pin can be removed for folding bike.
Bolt is used to join wood together. If built with crank and chain join wood only at axle to maintain foldable.
Seat post fits into sliding seat block and can slide up and down to adjust for height.
Front side of lower hinge.
Top handle bar. Drill and fit dowel 11" by 7/8". Handle stem is 5" long.
Drill and fit 1/4" nylon cord. Knot and use quick tighten cam (you can buy these at a a shop that sells sailing supply stores) to lock onto cord. Cord is released to first knot and lower hinge is released to fold bike.
Lower rear connection showing chain engaged. For brake bolt brake arm (see through spokes).
Back side of lower hinge on front fork. Bolts are preferred over screws.
This versions of the bike show one way of attaching crack and chain. This frame worked best foot powered. Useing the crack casused strong twisting of the lower spars.
See here hinge pin being removed for folding bike.
View showing one way of attaching crank note that crank has been removed and reinserted into crank tube to enable the crank (red) frame to be rotated 180 degrees and still have the chain drive on the right side.
Here you can see the underside of the seat post support.
1 1/2-YEAR GUARANTEE. If for any reason you're not completely pleased with your purchase, return it in original, dry and clean condition within 30 days of receipt for a full refund or exchange as you wish. All items in this catalog have a warranty against defects in materials and workmanship for 1 1/2 years. Should any product prove defective we will repair or replace it at no cost to you. Special Orders are not returnable. Read Snow and Wind Warnings.
Questions? Orders & Customer Service: Toll Free 866-777-1066 or 831- 464-2002 firstname.lastname@example.org Technical: 650-323-6202 email@example.com. Copyright © Shelter Systems 1976 - 2011 All Rights Reserved